বিষয়বস্তুতে যান
DIY Art Packহোম
Rose Garden Envelope
AI finished-project visualization · not a photograph

তৈরির নির্দেশিকা · 4 illustrated sections

Rose Garden Envelope

One botanical envelope, 110 × 75 mm when folded, with a blank address panel. Follow 4 illustrated sections. Download the complete making guide and matching paper.

প্রিন্টযোগ্য ক্রাফট শিট

রঙিন অংশ সাদা কার্ড পেপারে অথবা রেখাচিত্র হালকা রঙের কাগজে প্রিন্ট করুন। কাজটি তৈরি করতে এই অংশগুলো কেটে নিন।

শিট 1শিট 1শিট 2শিট 2

Printable material sheets · 1 color + 1 outline page

A4 PDF ↓Letter PDF ↓

Print at 100% / Actual size; turn off Fit to page. Check the 100 mm bar. Color page on white paper; outline page on light colored paper. Print only the required version.

সব শিট দেখুন (2 পৃষ্ঠা)
শিট 1শিট 2

ছবিসহ ধাপ

  1. 1.1. Print the color page at 100% and check the 100 mm bar. Cut the one continuous outer contour; keep the front, four flaps and blank writing panel connected.
    1

    Print the color page at 100% and check the 100 mm bar. Cut the one continuous outer contour; keep the front, four flaps and blank writing panel connected.

  2. 2.1. Score the blue dashed lines with a ruler and blunt tool. Place the patterned side down and fold both narrow side flaps inward. Apply a thin strip of glue only to the side areas where the lower flap will overlap.
    2

    Score the blue dashed lines with a ruler and blunt tool. Place the patterned side down and fold both narrow side flaps inward. Apply a thin strip of glue only to the side areas where the lower flap will overlap.

  3. 3.1. Fold the broad lower flap upward and press it onto the side flaps. Keep its upper edge open and keep glue away from the pocket opening. Let it dry before inserting a card smaller than 105 × 65 mm.
    3

    Fold the broad lower flap upward and press it onto the side flaps. Keep its upper edge open and keep glue away from the pocket opening. Let it dry before inserting a card smaller than 105 × 65 mm.

  4. 4.1. Fold the top flap down to close. Add a removable sticker or a tiny amount of glue only when you are ready to seal it. The blank front panel can be handwritten.
    4

    Fold the top flap down to close. Add a removable sticker or a tiny amount of glue only when you are ready to seal it. The blank front panel can be handwritten.

The finished image is an AI visualization. Follow the actual printable shapes and dimensions; this project has not been physically assembled.

DIY Art Pack · Personal, educational and commercial use

সম্পর্কিত

খাম